PRODUCTION TERMS AND CONDITIONS

Definitions

As used in this Agreement, the following terms shall have the meanings set forth below. In the event of any ambiguity or conflict between trade usage and these definitions, these definitions shall control:

As used in this Agreement, the following terms shall have the meanings set forth below. In the event of any ambiguity or conflict between trade usage and these definitions, these definitions shall control:

  • Rosin means a cannabis concentrate produced through mechanical extraction using heat and pressure, without the use of solvents. Unless expressly specified as “Live Rosin,” Rosin may be made from cured cannabis material.

  • Live Rosin means Rosin produced exclusively from fresh-frozen, undried cannabis material to preserve terpene and cannabinoid profiles characteristic of “live” extraction.

  • Hash means a cannabis concentrate consisting of compressed or purified resin glands (trichomes) mechanically separated from plant material, including dry-sift or ice-water hash, but excluding solvent-based extracts.

  • Live Hash means Hash produced from fresh-frozen, undried cannabis plant material using mechanical separation methods, preserving the live terpene and cannabinoid profile.

  • Certificate of Analysis (COA) means a documented laboratory test result demonstrating cannabinoid profile, potency, terpene content, or contaminant screening for cannabis or cannabis-derived products.

  • Producer means White Label Canna, or any other entity under common ownership or control that performs production services pursuant to this Agreement.

Any descriptions of materials or infusion types used in Production Orders shall be interpreted consistent with the above definitions, and no broader or different meaning shall be implied without express written agreement.

Unless otherwise defined herein, all terms used in this Agreement shall be construed in accordance with their generally accepted meanings in the commercial cannabis industry as of the Effective Date, including any relevant usage of trade or course of dealing between the parties.

Any descriptions of materials or infusion types used in Production Orders shall be interpreted consistent with the above definitions, and no broader or different meaning shall be implied without express written agreement.

1. Cancellation Policy

If the production order is canceled by Client after execution of the order but prior to the commencement of production work, Client shall remain responsible for all actual, reasonable, and documented costs incurred by Producer in preparation of the order. Such preparation costs may include, without limitation, procurement of materials, scheduling of production time, labor for preliminary processing or staging, equipment cleaning or configuration, and other expenses directly allocable to the canceled order. Producer shall provide Client with an itemized statement of such costs upon cancellation, and payment for these costs shall be due within fifteen (15) days of the invoice date. Producer shall have no further liability to Client for such cancellation beyond the payment of documented preparation costs.

2. Preparation Costs

Client acknowledges and agrees that Producer may incur non-recoverable costs for the preparation, staging, or pre-processing of raw materials necessary to fulfill production services, including but not limited to trimming, grinding, decarboxylation, emulsification, batching, or infusion preparation. Client shall be solely responsible for reimbursing all reasonable and documented preparation costs incurred by Producer, whether or not the production run is completed, provided such costs are allocable to Client’s order.

3. Assumption of Risk – Customer-Supplied Materials

To the extent Client provides any raw materials, intermediate goods, or components for use in production services under this Agreement, including but not limited to cannabis biomass, distillate, concentrates, cones, or infusion agents, such materials shall at all times remain the sole and exclusive property of Client. No transfer of title shall occur by virtue of Producer’s possession, handling, transformation, or storage of such materials. Producer shall act solely as a service provider with respect to these materials, and nothing in this Agreement shall be construed to grant Producer any ownership, security interest, or lien therein. Risk of loss remains with Client, except to the extent caused by Producer’s gross negligence or willful misconduct. Producer shall have no liability whatsoever, under any theory of law or equity, for the loss, degradation, contamination, alteration, or destruction of any Customer-Supplied Materials while in Producer’s possession, custody, or control. Client assumes all risk of loss, including but not limited to losses resulting from unforeseen environmental, technical, or mechanical failures.

4. Seller-Supplied Materials

If Producer is supplying any raw materials, biomass, cannabis-derived components, infusion agents, or other inputs for use in production services under this Agreement (“Seller-Supplied Materials”), the following provisions shall apply:

a. Testing and Certificates of Analysis.

· For any Seller-Supplied Materials that are cannabis biomass or cannabis-derived components and that have been processed by Producer in a manner requiring state-mandated testing (including but not limited to cured biomass, distillate, hash, rosin, resin, or other extracted or infused components), Producer shall obtain and pay for such required testing, and shall provide Client with any available certificates of analysis (“COAs”) upon request and in advance of production.

· For any cannabis biomass or cannabis-derived components sourced from third parties that have existing COAs, Producer shall make those COAs available to Client upon request.

· For live inputs derived from fresh-frozen cannabis biomass that do not have pre-existing COAs, Producer may, in its commercially reasonable discretion, determine whether additional testing is feasible or necessary, and shall make any resulting COAs available to Client in advance of production. Post production for inputs derived from fresh-frozen cannabis biomass that does not have an existing COA prior to production will be full panel tested and resulting COA provided to Client prior to delivery. 

b. Acceptance of Materials.

Client shall have one (1) business day from receipt of any available COA or testing documentation to notify Producer in writing of any objection to the suitability of the materials. Failure to so notify Producer within that period shall constitute acceptance of the Seller-Supplied Materials for use in production.

c. Buyer-Requested Additional Testing.

If Client requests any additional testing beyond standard panel testing typically conducted or required under applicable state law (for example, a full-panel test when only potency and terpene testing is standard), Client shall be solely responsible for the cost of such additional testing

d. Disclaimer of Warranties.

Producer makes no warranties, express or implied, with respect to Seller-Supplied Materials beyond the representations set forth in any COAs or testing documentation actually provided to Client. Producer expressly disclaims any warranty of merchantability or fitness for a particular purpose except as expressly set forth in such COAs. Producer shall not be liable for any deviation in final potency, cannabinoid content, or terpene profile attributable to processing variability, input variation, or losses inherent in standard manufacturing practices.

5. No Warranty on Testing Outcomes

Producer makes no representation or warranty as to the chemical composition, potency, purity, contaminant levels, or test results of any finished product derived from Customer-Supplied Materials. Client acknowledges that final test results may vary depending on the quality and condition of the inputs provided. Producer expressly disclaims any responsibility for any deviation in test results, and Client agrees that such deviation shall not constitute a defect or non-conformity in the processing services provided. Client is solely responsible for determining the suitability of all materials and services for its intended use.

6. Product Liability Disclaimer

Producer shall not be deemed a manufacturer, distributor, or seller of any finished cannabis product for any purpose under Arizona or federal law. Producer assumes no responsibility for injuries, adverse effects, or other liabilities arising from consumer use of the final product into which Customer-Supplied Materials are incorporated.

7. Regulatory Compliance and Testing Responsibility

Client shall be solely responsible for ensuring that all finished goods derived from Customer-Supplied Materials comply with applicable federal, state, and local laws, regulations, and testing standards. Client shall procure and pay for all required testing, and shall bear full responsibility for any failures to meet regulatory thresholds, including but not limited to those concerning THC content, microbial content, heavy metals, residual solvents, pesticides, or mycotoxins.

8. Indemnification for Loss or Waste

To the fullest extent permitted by law, Client shall indemnify, defend, and hold harmless Producer and its officers, members, employees, contractors, and agents from and against any and all claims, losses, damages, liabilities, penalties, costs, and expenses (including reasonable attorneys’ fees) arising out of or relating to (a) the quality, legality, or condition of any Customer-Supplied Materials, (b) any regulatory action or third-party claim concerning such materials, or (c) any waste, spoilage, or loss occurring during processing unless resulting from Producer’s gross negligence or willful misconduct.

9. No Assumption of Regulatory Responsibility

Producer shall not be liable for compliance with packaging, labeling, dosage form, marketing, or end-use restrictions imposed by the Arizona Department of Health Services or any other regulatory body. Responsibility for such compliance rests exclusively with Client.

10. Indemnification for Loss or Waste

To the fullest extent permitted by law, Client shall indemnify, defend, and hold harmless Producer and its officers, members, employees, contractors, and agents from and against any and all claims, losses, damages, liabilities, penalties, costs, and expenses (including reasonable attorneys’ fees) arising out of or relating to (a) the quality, legality, or condition of any Customer-Supplied Materials, (b) any regulatory action or third-party claim concerning such materials, or (c) any waste, spoilage, or loss occurring during processing unless resulting from Producer’s gross negligence or willful misconduct.

11. Independent Contractor Relationship

Nothing herein shall be construed to create a partnership, joint venture, or co-manufacturing relationship. Producer is acting solely as a contract processor and not as a co-brand, co-packer, or co-manufacturer. Neither party shall have the authority to bind the other or incur obligations on behalf of the other without prior written consent.

12. Governing Law and Jurisdiction

This Agreement shall be governed by the laws of the State of Arizona, including its Uniform Commercial Code provisions. Exclusive jurisdiction and venue for any dispute shall lie with the state and federal courts located in Maricopa County, Arizona. The parties consent to such jurisdiction and venue and waive any objections thereto.

13. Production Tolerances and Quality Disclaimer

Producer shall exercise commercially reasonable efforts to perform production services in a professional and workmanlike manner consistent with standard industry practices. Client acknowledges and agrees that production outcomes, including but not limited to preroll weight, size, density, infusion distribution, and appearance, are subject to normal manufacturing variances.

Unless otherwise expressly agreed in writing, prerolls produced under this Agreement shall be deemed conforming if, on a commercially reasonable sampling basis, they fall within a tolerance of plus or minus ten percent (±10%) of the specified target weight per unit. Client acknowledges that minor, occasional out-of-tolerance units may occur in production runs and that such variations shall not constitute a breach of this Agreement provided overall production conforms within the specified tolerance range on a commercially reasonable basis.

Tolerance specifications may be adjusted by mutual written agreement for specific production orders. Client further acknowledges that natural variations in biomass, humidity, grind consistency, and infusion techniques may result in minor differences between units or batches. Producer expressly disclaims any warranty or guarantee of perfect uniformity or absolute conformity beyond the stated tolerance range. Any prerolls delivered within these specifications shall be deemed accepted and compliant with this Agreement.

14. Entire Agreement

This Agreement constitutes the entire, final, and integrated agreement between the parties with respect to its subject matter, and supersedes all prior and contemporaneous understandings, negotiations, representations, and warranties, whether written or oral. No amendment or modification shall be effective unless in writing and signed by both parties.

15. Payment Terms; Late Fees, Attorneys’ Fees, and Dispute Resolution

Unless otherwise agreed in writing, invoices issued under this Agreement shall be due and payable in full within the payment terms specified in the applicable Production Order (for example, COD, Net 15, or Net 30). If no payment terms are specified in the Production Order, payment shall be due COD upon delivery of the finished product.

Any payment not received by Producer when due shall be subject to a service charge of 1.5% per month (18% per annum), or the maximum rate permitted by applicable law, whichever is less, calculated from the due date until paid. Producer may also charge a late payment administrative fee of up to $50 per delinquent invoice.

Client shall be responsible for all reasonable costs of collection, including attorneys’ fees, court costs, and expenses incurred by Producer in enforcing its rights hereunder. The prevailing party in any action or proceeding to enforce or interpret this Agreement shall be entitled to recover its reasonable attorneys’ fees and costs.

At Producer’s sole discretion, any dispute arising out of or relating to this Agreement may be submitted to binding arbitration administered by the American Arbitration Association under its Commercial Arbitration Rules, with the hearing to be held in Maricopa County, Arizona. Judgment on the award rendered by the arbitrator may be entered in any court of competent jurisdiction. Nothing in this section shall preclude Producer from seeking injunctive relief or pursuing collection of unpaid invoices in court.

16. Limitation of Liability

Producer’s total liability for any claim arising out of or relating to this Agreement, including any Production Order, shall be strictly limited to the amount actually paid by Client for the specific production batch or service giving rise to the claim.

In no event shall Producer be liable for any indirect, incidental, special, punitive, exemplary, or consequential damages of any kind, including without limitation lost profits, loss of use, loss of business opportunities, loss of goodwill, or diminution of value, even if Producer has been advised of the possibility of such damages.

Client expressly acknowledges and agrees that this limitation of liability is a material term of this Agreement and reflects an agreed allocation of risk between the parties.

v1.1.2 

Last Updated 06/28/2025